In a fast-evolving industry, Prime Steel Industries remains adaptive, ensuring that its products and services align with the dynamic demands of the market.
Corporate Off: No.6, Ground Floor, 32, Parekh House,
7th Khetwadi, Mumbai – 400004, Maharashtra, India.
Prime Steel is a leading manufacturer and supplier of high-quality Incoloy 800 flanges. Renowned for our commitment to excellence, we specialize in producing flanges that meet the rigorous demands of various industries. At Prime Steel, We ensure that each Incoloy 800H Flange is meticulously crafted to precise specifications, guaranteeing reliability and durability. With our dedication to quality and customer satisfaction, We are trusted choice for those seeking superior Incoloy 800HT flange solutions.
Type: Flanged Pipe Fittings
Material: Incoloy
ASTM: B564 / SB564
Grade: Alloy 800/ 800h/ 800ht
UNS: N08800/ N08810/ N08811
WNR: 1.4876/ 1.4958 / 1.4876/ 1.4859 / 1.4876
ASTM B564 / ASME SB564 Inconel 800/ 800H/ 800HT
15mm ( 1/2" NPS ) up to 600mm ( 24" NPS ), For 2500# in sizes from NPS 1/2 to NPS 12
FF—Flat Face, RF—Raised Face, FM—Female Face, M—Male Face, T—Tongue Face, G—Groove Face, RJ—Ring Joint.
ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN
150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64.
Chemical Processing, Oil and Gas Industry, Petrochemical Industry
Inconel 800 is a special kind of metal known for being really strong and not getting damaged easily, even when it's really hot. So, when we talk about "ASTM B564 Inconel 800 Flanges," we mean these flanges are made following the rules in ASTM B564, using the strong metal Inconel 800.
Inconel 800H is a type of strong metal that can handle high temperatures really well. So, when we say "ASTM B564 Inconel 800H Flange," it means these flanges are made following the instructions in ASTM B564 using the tough metal Inconel 800H.
Inconel 800HT is a strong metal that can handle really high temperatures without getting damaged. So, when we talk about "ASTM B564 Inconel 800HT Flange," it means these flanges are made following the rules in ASTM B564, using the tough metal Inconel 800HT.
Check ANSI/ASME B16.5, B 16.47 Series A & B, B16.48 Flange Dimensions Download
| STANDARD | UNS | WERKSTOFF NR. | JIS | BS | GOST | AFNOR | OR | EN |
|---|---|---|---|---|---|---|---|---|
| 800 | N08800 | 1.4876 | NCF 800 | NA 15 | ЭИ670 | Z8NC32-21 | XH32T | X10NiCrAlTi32-20 |
| 800H | N08810 | 1.4958 / 1.4876 | NCF 800H | NA 15(H) | ЭИ670 | Z8NC33-21 | XH32T | X5NiCrAlTi31-20 |
| 800HT | N08811 | 1.4859 / 1.4876 | NCF 800HT | NA 15(HT) | ЭИ670 | – | XH32T | X8NiCrAlTi32-21 |
| Grade | C | Mn | Si | Fe | Ni | Cr | S | Cu | Al | Ti |
|---|---|---|---|---|---|---|---|---|---|---|
| 800 | 0.10 max | 1.50 max | 1.00 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.015 max | 0.75 max | 0.15 – 0.60 | 0.15 – 0.60 |
| 800H | 0.05 – 0.10 | 1.50 max | 1.00 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.015 max | 0.75 max | 0.15 – 0.60 | 0.15 – 0.60 |
| 800HT | 0.06 – 0.10 | 1.50 max | 1.00 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.015 max | 0.75 max | 0.15 – 0.60ᴬ | 0.15 – 0.60ᴬ |
| Element | Density | Tensile Strength | Melting Point | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|---|---|---|
| 800 / 800H / 800HT | 7.94 g/cm3 | Psi – 75,000 , MPa – 520 | 1385 °C (2525 °F) | Psi – 30,000 , MPa – 205 | 30 % |
Incoloy 800 Flange: Standard grade with good strength and corrosion resistance.
Incoloy 800H Flange: Higher carbon content for enhanced creep and rupture strength at elevated temperatures.
Incoloy 800HT Flange: Further heat-treated for superior properties in high-temperature applications, offering improved strength and oxidation resistance compared to 800 and 800H.
